Tekram's ATA/100 RAID controllers provide low cost data protection and  increased   performance for a full range of servers and workstation user  employing ATA disk drives.   The DC200 allows users to connect multiple hard  drives for data mirroring and striping   applications for  performance and  data-redundancy concerns.
 Features
 Supports RAID 0(striping), RAID 1(mirroring),
 RAID 0+1 (striping and mirroring), JBOD.
 Two independent IDE channels support up to
 four Ultra ATA/100/66 drives.
 Supports hot-swap to automatically rebuild
 mirror array Up to 2 cards can co-exist in
 one System.
 Easy-to-use GUI-based software for monitoring
 and storage management.
 Processors            : Aralion, a PCI Dual Channel Ultra DMA/ATA 100                          Controller with 100MB/sec transfer rate.
 BIOS                  : Yes (Flash), multi-boot features allow users to                          select booting device.
 Max Transfer Rate     : 100MB/Sec (Ultra ATA/100)
 PCI Interface         : 30 bits, PCI 2.2
 Max Devices           : 4

 Target Application    : Allows users to connect multiple hard drives for                          data mirroring and striping applicaitons for                          performance and data-redundancy concern.

                         Apply to network subsystems for the users of 3D                          Graphics, Video Editing, CAD Development,                          entry-level servers, NAS and other areas that                          require the accelerated performance and fault                          tolerance.
 Supported IDE Devices : Transfer Rate: up to 100MB/Sec, Bus Width: 16-bit                          HDD, CD-ROM, CD-RW, DVD-ROM, ZIP-DRIE, LS-120,etc.